PDA

View Full Version : Dell R430 with Perc H330 problems with xen



crobison
25-Mar-2015, 20:09
When I setup the perc H330 and load the drive on the install of SLES 11 sp3 64, I get no problem, but when I install Xen and try to boot up, I get a "could not find /dev/by-id/md-uuid...

jmozdzen
26-Mar-2015, 18:25
Hi crobison,

When I setup the perc H330 and load the drive on the install of SLES 11 sp3 64, I get no problem, but when I install Xen and try to boot up, I get a "could not find /dev/by-id/md-uuid...

that sounds like the according driver hasn't made it into the initrd used with the xen kernel. Have a close look at the output of "mkinitrd" when booting the non-Xen kernel, check for differences in included modules between the non-Xen / Xen kernels.

Regards,
Jens

crobison
27-Mar-2015, 22:52
Hi crobison,


that sounds like the according driver hasn't made it into the initrd used with the xen kernel. Have a close look at the output of "mkinitrd" when booting the non-Xen kernel, check for differences in included modules between the non-Xen / Xen kernels.

Regards,
Jens

Driver issue, not installed completely, now it works... but what I would like to know is there a way to check to see if the mirroring on the perc is working?