View Full Version : Install Software SLED 12.2 - instructions and experiences

15-Jan-2017, 19:50
I have installed SLED 12.2 incl. SUSE service and may admit: some tips and tricks are based on support from Service or based on what I learned from SUSE.
Further, the paid service is money worth. I have never before gotten so extensive and good service as I got from SUSE (as professional)

In this thread I will show my experiences for installation of typical software on SLED 12.2, that would be needed on a Desktop environment for professional use.

Be aware about following:
SLED is a software package that is checked and controlled. This makes it stable and professional. But software opportunities are not sufficient. Installation from other sources violate SLED. It is a risk installing not proven software. Especially when updating core files, kernel, it can give significant problems.
When installing major updates it may be better not deleting the old files. Snap shots and recovery do not work when files are deleted. Only image backup may work.

Further: openSuse and SUSE work clother together. this makes sense.
Distrowatch compare versions and Leap 42.2 is closest to SLED 12.2, means should make less trouble.

15-Jan-2017, 21:20

why: Most people uses also software that is not available for Linux. E.g engineers and CAD software. VB is a nice way to solve this. You work in Linux and under control of Linux but have a full Windows System with needed software.

Virtualbox uses kernel and make most trouble on SLED. I installed VB before a kernel update - then update of kernel. -->Thereafter I installed the whole system once again. :(
Better is: first kernel update and then install virtual box. :) Kernel update seems to be an issue for VB.
Actual SUSE check if KVM would be a better option and is supported.
However, Virtualbox is well known and work well.
Einrichten: (german instruction how to use - however, there are plenty instructions on www)
I found openSuse virtual box repositories doesn't work well. I used rater the original

http://www.oracle.com/technetwork/server-storage/virtualbox/downloads/index.html (oracle)
Both are basically the same an possible

After installing virtual box, start virtual box: The extension pack on same page need to be installed.
+ extension pack install

Sometimes you may face a failure
+ missing files
Solution is:
># zypper in make gcc gcc-c++ kernel-source kernel-syms<
reboot system.

Be aware:
Move a virtual box image from one to other computer works. But you need:
- exact same virtual box running
- with exact same setup for number of cores and ram.
For Windows 10, Virtual box may be unstable. I faced some break downs.
Further, Linux is master. IF Linux not work well, VB do not work well.

15-Jan-2017, 21:23

Shutter is a great software for screen shots - similar snipe in Windows.
Find shutter:
Some files are missing for edit function. You can find them here.

15-Jan-2017, 21:26
VLC player:

VLC is the best tool for video. It simply works and contain the codec needed.

Do not use SUSE files! Use orginal VLC or packman
or use packman (best solution)

install: FFmpeg (codecs) in YAST
Change all packages to packman
It is important to change all codecs and VLC files to packman. Codecs do not work if files comes from SUSE.
This is the reason and trick.

15-Jan-2017, 21:28
nneded for Internet video


15-Jan-2017, 21:42
This thread need a thanks to SUSE enerprice service Mr Richard Schaertel that found out how to do.

Installation of Skype.
Opensuse repository doesn't work well. Use Skype direct and Skype Dynamic

Download SKYPE dynamic and unzip it.
In readme is written where to save/copy the packages.

Skype do not find these libraries. You can install them in YAST

Dependencies can be found with:
# zypper wp
as example
# zypper wp libXv.so.1
but not needed

are all dependencies o.k can be found with
# ldd
Skype-bin files has been saved in
# ldd /usr/bin/skype
linux-gate.so.1 (0xf773c000)
libXv.so.1 => /usr/lib/libXv.so.1 (0xf5401000)
libXss.so.1 => /usr/lib/libXss.so.1 (0xf53fd000)

Open the file skype96x96 to be find in skype ICON with Inkscape and save as Skype.svg below /usr/share/icons/gnome/scalable/apps/skype.svg .

If you wish a desktop icon then make in /usr/share/applications/ a new file named 1.desktop, and add following text

[Desktop Entry]
# Exec=/path/to/Skype/executable (z.B. /usr/bin/skype) possible too
# here you can define the category where skype shall be shown in menu

Thereafter make the file executable with
# chmod 755 1.desktop
The symbol change and you can start Skype with it.