HI
here is the output

[ 3.341522] usb 1-9.3: new full-speed USB device number 7 using xhci_hcd
[ 3.359075] usb 1-9.3: New USB device found, idVendor=2149, idProduct=36b3
[ 3.359116] usb 1-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.359153] usb 1-9.3: Product: weid
[ 3.359188] usb 1-9.3: Manufacturer: Weid
[ 3.361513] input: Weid weid as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.0/input/input6
[ 3.361597] generic-usb 0003:2149:36B3.0004: input,hidraw3: USB HID v1.10 Device [Weid weid] on usb-0000:00:14.0-9.3/input0
[ 5.550028] Initializing USB Mass Storage driver...
[ 5.550121] scsi4 : usb-storage 1-1:1.0
[ 5.550224] usbcore: registered new interface driver usb-storage
[ 5.550266] USB Mass Storage support registered.
[ 948.783716] usb 1-9: USB disconnect, device number 5
[ 948.783724] usb 1-9.3: USB disconnect, device number 7
[ 990.832867] usb 1-9: new high-speed USB device number 8 using xhci_hcd
[ 990.849073] usb 1-9: New USB device found, idVendor=045b, idProduct=022b
[ 990.849080] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 990.849645] hub 1-9:1.0: USB hub found
[ 991.136697] usb 1-9.3: new full-speed USB device number 9 using xhci_hcd
[ 991.154189] usb 1-9.3: New USB device found, idVendor=2149, idProduct=36b3
[ 991.154197] usb 1-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 991.154202] usb 1-9.3: Product: weid
[ 991.154205] usb 1-9.3: Manufacturer: Weid
[ 991.157871] input: Weid weid as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.0/input/input14
[ 991.158063] generic-usb 0003:2149:36B3.0005: input,hidraw3: USB HID v1.10 Device [Weid weid] on usb-0000:00:14.0-9.3/input0
[ 1144.621499] usb 1-9: USB disconnect, device number 8
[ 1144.621507] usb 1-9.3: USB disconnect, device number 9
[ 1160.660497] usb 1-9: new high-speed USB device number 10 using xhci_hcd
[ 1160.676658] usb 1-9: New USB device found, idVendor=045b, idProduct=022b
[ 1160.676666] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1160.677221] hub 1-9:1.0: USB hub found
[ 1160.964326] usb 1-9.3: new full-speed USB device number 11 using xhci_hcd
[ 1160.981853] usb 1-9.3: New USB device found, idVendor=2149, idProduct=36b3
[ 1160.981861] usb 1-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1160.981866] usb 1-9.3: Product: weid
[ 1160.981869] usb 1-9.3: Manufacturer: Weid
[ 1160.985618] input: Weid weid as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.0/input/input15
[ 1160.985812] generic-usb 0003:2149:36B3.0006: input,hidraw3: USB HID v1.10 Device [Weid weid] on usb-0000:00:14.0-9.3/input0

and i was trying to install the xinput calibrator(which might help to calibrate the screen under linux) from a tarball( no package for suse it seems) and i cant install it.
im lost with ./configure, then make and install

regards