Here you have an example xml file , but it not works. I want to install novell oes 11 with an autoyast file, can you give me some suggestions? Thanks.
Code:
<?xml version="1.0"?>
<profile xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config="http://www.suse.com/1.0/configns">
<add-on>
    <add_on_products config:type="list">
      <listentry>
        <media_url>nfs://192.168.181.131/media/opsware/linux/OES11/</media_url>
        <product>OPEN_ENTERPRISE_SERVER</product>
        <product_dir>/</product_dir>
      </listentry>
    </add_on_products>
  </add-on>
  <configure>
    <scripts>
      <post-scripts config:type="list"/>
      <pre-scripts config:type="list"/>
    </scripts>
    <users config:type="list">
      <user>
        <encrypted config:type="boolean">false</encrypted>
        <user_password>opsware</user_password>
        <username>root</username>
      </user>
      <user>
        <encrypted config:type="boolean">false</encrypted>
        <user_password>opsware</user_password>
        <username>shadow</username>
      </user>
    </users>
    <networking>
      <dns>
        <dhcp_hostname config:type="boolean">true</dhcp_hostname>
        <dhcp_resolv config:type="boolean">true</dhcp_resolv>
      </dns>
      <interfaces config:type="list">
        <interface>
          <bootproto>dhcp</bootproto>
          <device>eth0</device>
          <startmode>onboot</startmode>
        </interface>
      </interfaces>
    </networking>
  </configure>
  <install>
    <bootloader>
      <activate config:type="boolean">false</activate>
      <kernel_parameters></kernel_parameters>
      <lba_support config:type="boolean">false</lba_support>
      <linear config:type="boolean">false</linear>
      <location>mbr</location>
    </bootloader>
    <firewall>
      <FW_ALLOW_FW_BROADCAST_DMZ>no</FW_ALLOW_FW_BROADCAST_DMZ>
      <FW_ALLOW_FW_BROADCAST_EXT>no</FW_ALLOW_FW_BROADCAST_EXT>
      <FW_ALLOW_FW_BROADCAST_INT>no</FW_ALLOW_FW_BROADCAST_INT>
      <FW_DEV_DMZ></FW_DEV_DMZ>
      <FW_DEV_EXT>eth0</FW_DEV_EXT>
      <FW_DEV_INT></FW_DEV_INT>
      <FW_FORWARD_ALWAYS_INOUT_DEV></FW_FORWARD_ALWAYS_INOUT_DEV>
      <FW_FORWARD_MASQ></FW_FORWARD_MASQ>
      <FW_IGNORE_FW_BROADCAST_DMZ>no</FW_IGNORE_FW_BROADCAST_DMZ>
      <FW_IGNORE_FW_BROADCAST_EXT>yes</FW_IGNORE_FW_BROADCAST_EXT>
      <FW_IGNORE_FW_BROADCAST_INT>no</FW_IGNORE_FW_BROADCAST_INT>
      <FW_IPSEC_TRUST>no</FW_IPSEC_TRUST>
      <FW_LOG_ACCEPT_ALL>no</FW_LOG_ACCEPT_ALL>
      <FW_LOG_ACCEPT_CRIT>yes</FW_LOG_ACCEPT_CRIT>
      <FW_LOG_DROP_ALL>no</FW_LOG_DROP_ALL>
      <FW_LOG_DROP_CRIT>yes</FW_LOG_DROP_CRIT>
      <FW_MASQUERADE>no</FW_MASQUERADE>
      <FW_PROTECT_FROM_INT>no</FW_PROTECT_FROM_INT>
      <FW_ROUTE>no</FW_ROUTE>
      <FW_SERVICES_DMZ_IP></FW_SERVICES_DMZ_IP>
      <FW_SERVICES_DMZ_RPC></FW_SERVICES_DMZ_RPC>
      <FW_SERVICES_DMZ_TCP></FW_SERVICES_DMZ_TCP>
      <FW_SERVICES_DMZ_UDP></FW_SERVICES_DMZ_UDP>
      <FW_SERVICES_EXT_IP></FW_SERVICES_EXT_IP>
      <FW_SERVICES_EXT_RPC></FW_SERVICES_EXT_RPC>
      <FW_SERVICES_EXT_TCP></FW_SERVICES_EXT_TCP>
      <FW_SERVICES_EXT_UDP></FW_SERVICES_EXT_UDP>
      <FW_SERVICES_INT_IP></FW_SERVICES_INT_IP>
      <FW_SERVICES_INT_RPC></FW_SERVICES_INT_RPC>
      <FW_SERVICES_INT_TCP></FW_SERVICES_INT_TCP>
      <FW_SERVICES_INT_UDP></FW_SERVICES_INT_UDP>
      <enable_firewall config:type="boolean">false</enable_firewall>
      <start_firewall config:type="boolean">false</start_firewall>
    </firewall>
    <report>
        <messages>
          <timeout config:type="integer">10</timeout>
        </messages>
      <errors>
          <timeout config:type="integer">10</timeout>
        </errors>
      <warnings>
          <timeout config:type="integer">10</timeout>
        </warnings>
    </report>
    <runlevel>
      <default>3</default>
    </runlevel>
    <general>
      <clock>
        <hwclock>GMT</hwclock>
        <timezone>US/Pacific</timezone>
      </clock>
      <keyboard>
        <keymap>english-us</keymap>
      </keyboard>
      <language>en_US</language>
      <mode>
        <confirm config:type="boolean">false</confirm>
        <reboot config:type="boolean">true</reboot>
        <interactive config:type="boolean">false</interactive>
      </mode>
      <signature-handling>
        <accept_unsigned_file         config:type="boolean">true</accept_unsigned_file>
        <accept_file_without_checksum config:type="boolean">true</accept_file_without_checksum>
        <accept_verification_failed   config:type="boolean">true</accept_verification_failed>
        <accept_unknown_gpg_key       config:type="boolean">true</accept_unknown_gpg_key>
        <import_gpg_key               config:type="boolean">true</import_gpg_key>
        <accept_non_trusted_gpg_key   config:type="boolean">true</accept_non_trusted_gpg_key>
      </signature-handling>
      <mouse>
        <id>20_imps2</id>
      </mouse>
    </general>
    <partitioning config:type="list">
    <drive>
      <device>/dev/sda</device>
      <use>all</use>
      <partitions config:type="list">
        <partition>
		<filesystem config:type="symbol">reiser</filesystem>
	  <mount>/boot</mount>
	  <size>100mb</size>
	</partition>
	<partition>
	  <mount>swap</mount>
	  <size>1gb</size>
	</partition>
	<partition>
	<filesystem config:type="symbol">reiser</filesystem>
  	  <mount>/</mount>
	  <size>max</size>
        </partition>
      </partitions>
    </drive>
    </partitioning>
    <software>
      <patterns config:type="list">
        <pattern>base</pattern>
		<pattern>32bit</pattern>
      	<pattern>base-32bit</pattern>
		<pattern>apparmor</pattern>
      </patterns>
    </software>
  </install>
</profile>