Results 1 to 3 of 3

Thread: Replace SBD device in cluster

Hybrid View

  1. #1

    Replace SBD device in cluster

    I am needing to rebuild the array that contains the SBD device in the production cluster. My preference is to be able to do this online without taking the cluster down or at least only a rolling reboot. I do have 2 SBD devices running and am rebuilding only 1 of them.

    From looking at /etc/init.d/openais, here are my thoughts to accomplish this:

    crm resource stop p_stonith_sbd
    On each node:
      sbd -d /dev/mapper/mpath0 -d /dev/mapper/mpath1 -D -W -P message LOCAL exit
    < Remove multipath device, reconfigure array, reattach >
    sbd -d /dev/mapper/mpath0 -d /dev/mapper/mpath1 -1 30 -4 60 create
    On each node:
      sbd -d /dev/mapper/mpath0 -d /dev/mapper/mpath1 -D -W -P watch
    crm resource start p_stonith_sbd
    Does this look like a reasonable approach that will work?


  2. #2

    Re: Replace SBD device in cluster

    Did you think put you sbd resouce in is-managed??? but I thing that you approach is correct

    did you have one enviroment test? Regards!

  3. Re: Replace SBD device in cluster

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts