I can create autoyast to configure bonding with bond0 set at static ip
address, but cannot get an ask statement for the bond0 device's IP
Address (not using DHCP).
The following is my autoyast settings. any idea how I can get this to
work?
In the General Section:
<ask>
<pathlist config:type="list">
<path>networking,interfaces,bond0,ipaddr</path>
</pathlist>
<title>New Server IP Address</title>
<question>Enter the server IP Address:</question>
<stage>cont</stage>
<default>172.16.6.X</default>
</ask>

In the Networking Section:
<interfaces config:type="list">
<interface>
<bonding_master>yes</bonding_master>
<bonding_module_opts>mode=balance-alb
miimon=100</bonding_module_opts>
<bonding_slave0>eth0</bonding_slave0>
<bonding_slave1>eth1</bonding_slave1>
<bootproto>static</bootproto>
<device>bond0</device>
<ipaddr>value</ipaddr>
<netmask>255.255.255.0</netmask>
<prefixlen>24</prefixlen>
<startmode>auto</startmode>
<usercontrol>no</usercontrol>
</interface>
<interface>
<bootproto>none</bootproto>
<device>eth0</device>
<name>Emulex OneConnect 10Gb NIC (be3)</name>
<startmode>off</startmode>
<usercontrol>no</usercontrol>
</interface>
<interface>
<bootproto>none</bootproto>
<device>eth1</device>
<name>Emulex OneConnect 10Gb NIC (be3)</name>
<startmode>off</startmode>
<usercontrol>no</usercontrol>
</interface>
</interfaces>


--
cschaeferd
------------------------------------------------------------------------
cschaeferd's Profile: http://forums.novell.com/member.php?userid=46515
View this thread: http://forums.novell.com/showthread.php?t=449918