System:
openSuse 13.1 (oem)
'Toshiba P200-10a (not modified)'
(http://www.toshiba.de/discontinued-p...lite-p200-10a/)

Hello,

did anyone ever get managed a clear installation onto Harddisc?
I play around with SuseStudio since a year, everything works as long as
we dont talk about yast-live-installer.

So what happens?
the appliance is written using:

Code:
--------------------
sudo dd if=/MyAppliance.i686-0.0.1.raw of=/dev/sdh bs=4M
--------------------


it boots up and seems working good. Finaly i go through YaST2 to the
YaST-Live-Installer and complete the whole installation process.
Where i set:



sda1
350 MB
/boot


sda2
50 GB
/


sda3
6 GB
/swap


sda4
155 GB

/home



shutting System Down -> Remove USB Stick -> Grub2 boots successfull:

I see, (sometimes) 3 overlapping green loading bars on the bottom of the
Screen
and sometimes just the generic openSuse background image (with the
"build with suse studio" brand).
Thats all. Nothing happens anymore.
If i press F2, i come to a console screen that says:

Code:
--------------------

Trying manual resume from /dev/disk/by-id/usb-SanDisk_Cruzer(a looong number)DEB-0:0-part2
resume device /dev/disk/by-id/usb-SanDisk_Cruzer(a looong number)DEB-0:0-part2 not found (ignoring)
Trying manual resume from /dev/disk/by-id/usb-SanDisk_Cruzer(a looong number)DEB-0:0-part2
resume device /dev/disk/by-id/usb-SanDisk_Cruzer(a looong number)DEB-0:0-part2 not found (ignoring)

Waiting for device /dev/disk/by-id/usb-SanDisk_Cruzer(a looong number)DEB-0:0-part1 to appear ..................................................
Could not find /dev/disk/by-id/usb-SanDisk_Cruzer(a looong number)DEB-0:0-part1

Want me to fall back to /dev/disk/by-id/usb-SanDisk_Cruzer(a looong number)DEB-0:0-part1 ? <Y/n>

--------------------

This SanDisc thing is the USB-Drive where i did the installation from.
It makes no difference what key you press, the message just repeats.
Also there is no difference if
the stick is plugged in or not.

Do someone know whats going on there and how i can fix this?
As i mentioned befor. All my Appliance work in VirtaulMachines, as
LiveDisks and EC2-images.
Its just impossible to set it up.


--
BinarySoul
------------------------------------------------------------------------
BinarySoul's Profile: http://forums.opensuse.org/member.php?userid=85772
View this thread: http://forums.opensuse.org/showthread.php?t=500256